Installation Of The Cassette; Instructions For Use; Drying Times Average - Sagola DRY TECH DT2 Manual De Instrucciones

14/15

6.3. Installation of the cassette:

- Open the packing of the cassette
with care.
- Connect cassette with support arm
and tighten up with the screws.
- Connect control wires and adjust
the angle of cassette.

7. Instructions for use

1. Set curing time according to
the requirements of paint for
curing.
2. To achieve the best results, the
emitters should be parallel with
the Paint surface. Keep a
distance of 30-60cm from the
panel.
3. During the process of curing,
the paint surface must be clean
without wáter and impurities.
4. Switch on the power supply and
set up the curing time to start
curing process.
5. Turn off the equipment after using. Place the equipment in a safe place to avoid damage to
the lamp.

8. Drying times average

FILLER
PRIMER
PAINTS
SOLVENTS
NOTE: These are approximate average times. The product thickness, temperature and % humidity
can vary the drying time of the aforementioned products.
Switch ON/OFF
PRE-DRYING COMPLET DRYING
TIME TIME
- 10 min.
4 - 6 min. 8 - 10 min.
4 - 6 min. 8 - 10 min.
6 min. 8 - 12 min.
ENGLISH
Timer
DISTANCE
50 - 60 cm.
60 - 70 cm.
>70 cm.
>70 cm.