General Instructions - Seac Sub M-Synchro Instrucciones

Congratulations for choosing the
quality and reliability of a SEACSUB
S.p.A. product. The equipment you
bought was produced using selected
and tested materials. Our constant
evolution results from continuous
research and development. Innovative
production processes, constant testing
and actual functionality tests developed
at our research centre guarantees the
reliability characterizing all SEACSUB
S.p.A. products.
Warning!
This booklet is not a diving manual!
Read the whole instruction
handbook before using this
equipment!
This manual for use must be
preserved for the whole life of the
product!

General Instructions

Before using the regulator or any other
products for underwater diving, you
should attend a course held by qualified
instructors and obtain the relevant diving
certificate. The use of diving equipment by
non certified divers is dangerous and can
lead to serious accidents, or even death, to
the diver and his/her diving mates.
During the assembly and tuning of the re-
gulator, every step was taken to ensure hi-
gh reliability of the product over a period
of time. These steps however may become
ineffective if the regulator is not used cor-
rectly and if adequate maintenance is not
provided. Seacsub S.p.A declines any liabi-
lity for any problem arising from non-com-
pliance with the instructions contained in
this handbook.
Introduction
For any other problem, please contact your
Seacsub dealer or Seacsub S.p.A. directly.
Only servicing centres authorized by Seacsub
S.p.A. may carry out repairs or maintenance.
SEACSUB S.p.A. diving regulators are the
result of a research carried out in close co-
operation with many professional divers.
Their innovative features ensure a reliabi-
lity which remains unchanged even after a
long series of dives. At the same time, ea-
sy mechanics and operation allow an ex-
tremely simple maintenance.
If you are not experienced in the use of
this equipment, we strongly advise you to
get familiar with its operation during test
diving in shallow waters and under favora-
ble conditions; if needed, contact a quali-
fied instructor for a refresher course.
This diving regulator has been certified ac-
cording to standard EN 250: 2000 which
has provided a long series of functional te-
sts up to a maximum depth of 50 meters
and at a temperature of 4 degrees centi-
grade (test tolerance range -2°C/ +0°C).
This diving regulator is designed to be used
with normal atmospheric air complying with
the specifications of standard EN 12021.
Do not use this or any other product of the
Seacsub S.p.A. range with other gases or oxy-
gen enriched air mixtures (usually known as
NITROX). Failure to follow this recommenda-
tion could cause serious accidents or even
death, due to fire or explosions, or seriously
damage your equipment.
Warning!
Danger!
19