Maintenance And Servicing; After-Sales Service And Application Service - Bosch GCM 18V-305 GDC Professional Manual Original

Setting
– Loosen the clamping handle (14).
– Use a socket spanner (17 mm) to turn the set screw (75)
anticlockwise to reduce the clamping force or clockwise
to increase the clamping force.
– Set a bevel angle, retighten the clamping handle (14) and
check whether the required clamping force has been
reached.
Transport (see figure Z)
Before transporting the power tool, the following steps must
be carried out:
– Slide the glide arm (33) all the way back and secure it in
this position.
– Make sure that the depth stop (27) is pressed all the way
in and that the adjusting screw (26) fits through the re-
cess without touching the depth stop when moving the
glide arm.
– Guide the glide arm downwards until you can press the
transport safety lock (34) all the way in
– Slide the saw table extensions (8) all the way in.
– Set the bevel angle to 0° and tighten the clamping
handle (14).
– Turn the saw table (41) as far as possible to the left and
tighten the locking knob (12).
– Remove all accessories that cannot be securely fitted to
the power tool.
– If possible, transport unused saw blades in an enclosed
container.
– For transport, hold the power tool by the recessed
handles (16) on either side of the saw table.
When transporting the power tool, only use the trans-
u
port fixtures. Never carry the power tool by the pro-
tective devices, the glide arm or the handle.

Maintenance and servicing

Maintenance and cleaning
Accessories
Dust bag
GTA 2500 W saw stand
GTA 2500 Compact saw stand
GTA 2600 saw stand
GTA 3800 saw stand
3 601 M43 000: Saw blades for wood and fibreboard,
panels and strips
Standard for Wood
305 x 2.2/1.6 x 30 mm, 40 teeth
Standard for Wood
305 x 2.2/1.6 x 30 mm, 60 teeth
Bosch Power Tools
Standard for Wood
305 x 2.2/1.6 x 30 mm, 96 teeth
Expert for Wood
305 x 2.2/1.6 x 30 mm, 42 teeth
Expert for Wood
305 x 2.2/1.6 x 30 mm, 60 teeth
Expert for Wood
305 x 2.2/1.6 x 30 mm, 96 teeth
3 601 M43 000: Saw blades for aluminium
Standard for Aluminium
305 x 2.4/1.8 x 30 mm, 96 teeth
Expert for Aluminium
305 x 2.4/1.8 x 30 mm, 96 teeth
3 601 M43 000: Saw blades for fibre-cement plates
Expert for Fibre Cement
305 x 2.2/1.6 x 30 mm, 8 teeth

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Article number
You can find further service addresses at:
1 600 A01 ZE5
www.bosch-pt.com/serviceaddresses
0 601 B12 100
0 601 B12 400
Transport
0 601 B12 300
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
0 601 B24 000
suitable for road-transport by the user without further re-
strictions.
When shipping by third parties (e.g.: by air transport or for-
2 608 837 741
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
2 608 837 742
shipped, consulting an expert for hazardous material is re-
quired.
English | 47
Article number
2 608 837 744
2 608 644 527
2 608 644 528
2 608 644 529
2 608 837 782
2 608 644 547
2 608 644 559
1 609 92A 5HG | (09.12.2020)