Using The Accessories Supplied (Figs. 13 + 14) - Miele SBAN0 Instrucciones Operativas

en-US
Miele offer a range of other floorheads,
-brushes and accessories for other
types of flooring and special require-
ments.
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
 Vacuum carpets and rugs with the
brush retracted:
 Press the foot switch  .
Clean hard floors, especially delicate
flooring susceptible to scratches and
flooring with gaps or deep crevices,
with the brush extended:
 Press the foot switch  .
Activating the exhaust filter
TimeStrip change indicator®
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (Fig.
07).
a AirClean
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
If your vacuum cleaner is fitted with ex-
haust filter b or c, you need to activate
the TimeStrip® exhaust filter change in-
dicator.
 Pull the release catch for the dust
compartment lid upwards and open
the lid as far as it will go (Fig. 08).
 Remove the indicator strip (Fig. 09).
 Press the TimeStrip® exhaust filter
change indicator (Fig. 10).
14
After approx. 10–15 seconds a thin red
line will appear in the left-hand side of
the display (Fig. 11).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the Fil-
terBag when doing so.
How the TimeStrip® exhaust filter
change indicator works
The TimeStrip® exhaust filter change
indicator shows the remaining func-
tional life of the exhaust filter. After ap-
prox. 50 operating hours, or approx.
one year of average use, the display will
be completely filled with red (Fig. 12).
Using the accessories supplied
(Figs. 13 + 14)
 Dusting brush
 Upholstery nozzle
 Crevice nozzle
 Accessory holder for the three ac-
cessories supplied
Symbols on the holder show where to
attach the different accessories.
 Attach the accessories holder to the
hose connector socket at the top or
bottom of the suction hose. Make
sure it clicks into position.
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
– AllergoTeQ floorhead
– Turbobrush