Remote Control
1
2
3
4
5
6
7
8
9
10
1
9
23
7
21
9
15
3
6
19.
20. VOLUME +/-
21. BRIGHTNESS +/-
22. RESET +/-
23. WiFi indicator
Name
11
1. POWER
12
13
14
15
2. WiFi/USB
16
3. CAPTURE
17
18
4. FREEZE
5. ROTATE
19
20
6. INFO/
21
7. ▲,▼,◄, & ►
22
8. AUTO FOC
9. ZOOM +/-
10. ZOOM 1X
11. MUTE
12. CAMERA / PC
13. RECORD
8,19
14. RESOULTION
21
2
15. AE LOCK
16
4
16. LAMP
12
17. DEL
18. MODE
Make a selection.
Adjust the volume.
Adjust the brightness.
Reset to factory default setting.
WiFi status indicator: Please refer to LED Indicator section.
English-3
Function
Turn the unit on/off/standby*.
*Standby mode is supported when power
plugged in.
Switch between WiFi and USB mode.
Capture still image in Camera mode. In
continuous capture mode, press this button
again to stop.
Freeze live images.
Rotate the image by 0/180° in Camera
mode.
Press to view system information and
battery power status.
Pan and zoom-in image in live streaming.
-
Adjust the focus automatically.
Increase/decrease the image magnification
in camera mode.
Reset zoom level to 100%.
Set the volume to mute.
Switch the video signal between camera
and computer from the HDMI Input port
Start/Stop audio & video recording. Video
recording can only be saved in a USB flash
drive.
Press to switch between following modes:
- Auto detects the best resolution(4K,
720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
Lock the exposure to stop M70W
attempting to find optimal exposure.
Turn the overhead light on/off.
Delete
the
selected
Playback mode.
Press to switch between Normal, High
frame, and High quality, Microscope,
Infinity, or Marco mode.
picture/video
in