English
Before you begin
Thank you for purchasing our Tunturi REHA Rails
2019.
This product is not a complete trainer, but can be
used as an accessory for:
Tunturi T80/ T85 & T90 treadmills of the 2019
collection.
We therefore refer to the main product manual for
safety and warranty information as you cannot find
these in this manual.
You can download all Tunturi product manuals on
our website at all times.
Replacing the components does not require
special tools, but assumes a certain level of
technical competence and familiarity with basic
hand tools.
⚠IMPORTANT.
•
Before replace the standard handlebar for
the REHA rails be sure that the power has
been switch off and or the mains cable is
plugged off.
Assembly instructions
Description (fig. A)
Your treadmill is a piece of stationary fitness
equipment used to simulate walking or running
without causing excessive pressure to the joints.
Package contents (fig. B&C)
- The package contains the parts as shown in
fig. B.
- The package contains the fasteners as shown in
fig. C. Refer to the section "Description"
‼ NOTE
•
If a part is missing, contact your dealer.
12
Assembly (fig. D)
⚠ WARNING
•
Assemble the equipment in the given order.
•
Carry and move the equipment with at least
two persons.
⚠ CAUTION
•
Place the equipment on a firm, level surface.
•
Place the equipment on a protective base to
prevent damage to the floor surface.
•
Allow at least 100 cm of clearance around
the equipment.
•
Refer to the illustrations for the correct
assembly of the equipment.