Electrolux MLV34GGTWB Instructivo Y Advertencias página 5

1.Touch this pad to turn on or off your
washing machine.
2. Selection of Automatic Cycles
Turn the knob to select the desired
program. Depending on the model of
your machine, up to 14 programs may
be available.
3. Start/Pause
Press this pad when you want to
start or pause the operation of
your washer.
4. Soil Level
Press this pad to select the proper
level according to the amount of soil
of the load (minimum to maximum).
5. Selection of stages (manual cycles)
Repeatedly press this pad to select a
single stage or a combination of
washing stages you want to execute,
for example: spin only, or rinse and
spin. Indicator lights will come on
showing the selected stages.
6. My Cycle
This pad will allow you to save your
own wash cycle by selecting the
program of your preference, the
water level, spinning level and desired
temperature. Then press and hold 3
seconds the My Cycle pad to save
your cycle, so every time you require
it, your favorite program will be
executed. The selected options will be
illuminated by just pressing the My
Cycle pad and then the START pad.
ELECTRICAL ENERGY REQUERIMENTS
1
3
7. Delay Start
Use these two pads to select hours
of delay until the start of operation
(1 to 24 hours of delay), then press the
Start pad to confirm and start the
countdown, otherwise the delay will
not be executed. Once initiated the
Delay Start process, you can cancel it
by pressing the "-1 hr" pad for 3
seconds.
8. Temperature Level
Each cycle has recommended wash
temperature. Repeatedly press this
pad if you prefer a different
temperature (from cold to hot).
9. Water/ Load Level
Repeatedly press this pad to select
the desired level, or let the automatic
sensor to determine an optimal level.
We recommend using the automatic
option to efficiently wash a load and
saving large amounts of water.
Note: Both, the automatic and
manual levels are designed to save
water. It is normal that the load is not
completely immersed in water.
10. Spin Level
Repeatedly press this pad to select
the level of drying you want to get for
your clothes a er the wash cycle, or
use the automatic level so the
machine will select the recommended
level according to the selected
program.
2
11
4
5
8 9 10
12
13 14
11. Eco Care
By pressing this pad, you will be
saving more water in each wash cycle.
The EcoCare mode can only be used
in programs marked "EcoCare" in the
"Automatic Programs" knob.
12. Self-Cleaning (alarm)
The LED of this pad will light up
when the machine needs to run the
self-cleaning cycle. When this occurs,
press the "Self-cleaning" pad. Make
sure there are no clothes in the
washing machine and press
Start/Pause.
Note: When you use this program, the
"Automatic programs" knob will be
deactivated (LEDs will be off).
13. Extra Rinse
Press this pad if you want to execute
a double rinse on every wash program
(the Baby cycle always does),
excepting the Whites Cycle, Express
and Spin Wash.
14. Extra Spin
Press this pad if you want to extend
the spin time in order to achieve a
higher drying level. Note: In order to
lock the control panel, press the
"Extra Rinse" and "Extra-Spin" pads at
the same time for 3 seconds.
6
7
4