Electrical Connection - Electrolux EFG60750 Manual Del Usario

CoNNECTIoNS
DUCTED vERSIoN aIR EX-
haUST SYSTEM
When installing the ducted version,
connect the hood to the chimney us-
ing either a flexible or rigid pipe ø 150
or 120mm, the choice of which is left to
the installer.
To install a ø 150 pipe
• To install the dumper 10
• Fix the pipe in position using sufficient
pipe clamps (not supplied).
To install a ø 120 pipe
• To install a ø 120 mm air exhaust
connection, insert the reducer flange
9 on the dumper 10.
• Fix the pipe in position using sufficient
pipe clamps (not supplied).
• Remove any activated charcoal fil-
ters.
RECIRCULaTIoN vERSIoN aIR
oUTLET
• Cut a hole ø 125 mm in any shelf that
may be posi-tioned over the hood.
• Insert the flange 9 on the hood body
outlet.
• Connect the flange to the outlet on
the shelf over the hood using a flex-
ible or rigid pipe ø120 mm.
• Fix the pipe in position using sufficient
pipe clamps (not supplied).
• Fix the directional grille 8 on the recir-
culation air outlet using the 2 screws
12e (2,9 x 12,7) provided.
• Ensure that the activated charcoal fil-
ters have been inserted.

ELECTRICaL CoNNECTIoN

• Connect the hood to the mains
through a two-pole switch having a
contact gap of at least 3 mm.
Installation
�����
��
��
���
�����
electrolux 11
�����
�
�
�
EN