Dvd/Vcd Video Operation; Inserting A Disc; Ejecting A Disc; Accessing Dvd Mode - Jensen VM9224 Manual Del Usaurio

Ocultar thumbs Ver también para VM9224:

Idiomas disponibles

VM9224

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the

main TFT screen unless the parking brake is applied. If you attempt to

play a DVD while the vehicle is moving, the TFT screen displays

"PARKING" with a blue background. Rear video screens, if applicable,

will operate normally.

Upon inserting a DVD disc, DVD mode is entered and disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not

authorized, the 4-digit code must be entered and/or the disc must be

authorized (see "Rating Sub-menu Features" on page 21).

You cannot insert a disc if there is already a disc in the unit or if the power is

off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is

finalized and the DVD is closed.

Press the

button (3) on the unit or remote control (35) to eject the disc. The

unit automatically reverts to Tuner mode. You may eject a disc with the unit

powered off. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs,

press and hold the

button (3) on the unit or remote control (35) to reset the

loading mechanism. Normal operation resumes.

To switch to DVD mode when a disc is already inserted, press the SRC button

(4) on the front panel or remote control (8).

Tabla de Contenido