Inspection And Maintenance By User - Stihl FS 240 Manual De Instrucciones

The mowing head is supplied with
illustrated instructions for replacing the
blades. Keep the instructions for the
mowing head in a safe place.
WARNING
To reduce the risk of injury, always shut
off the engine before installing the
blades.
Remove the mowing head.
N
Replace blades as shown in the
N
illustrated instructions.
Mount the mowing head on the
N
machine.
FS 240, FS 240 R
Inspection and Maintenance
by User
Adjusting the Throttle Cable
The throttle cable can be adjusted only
when the machine is properly
assembled. The control handle must be
in the normal operating position.
If the following adjustments do not
produce the required result, have your
servicing dealer repair the machine.
STIHL recommends a STIHL servicing
dealer.
Machines with Bike Handle
Checking adjustment of throttle cable
Error: Engine speed increases when
only the throttle trigger is depressed.
1
2
Start the engine.
N
Depress the throttle trigger (2) – do
N
not press down the throttle trigger
lockout (1).
If the engine speed increases or if the
cutting attachment rotates, the throttle
cable has to be adjusted.
Shut down the engine.
N
Adjusting the Throttle Cable
Depress the throttle trigger lockout
N
(1) and the throttle trigger (2) as far
as stop and hold them in that
position.
Apply only sufficient pressure to hold the
levers against their stops.
Rotate screw in throttle trigger 1/2
N
turn counterclockwise.
Release the throttle trigger and
N
throttle trigger lockout.
Start the engine and check the
N
adjustment.
Shut down the engine and repeat
N
adjustment if necessary.
Models with Loop Handle
Use a suitable tool to push the slide
N
to the end of the slot (see
illustration).
English
43