Turning On/Off The Power - Sharp PN-Q901 Guía De Configuración

AC power supply
■ PN-Q901/PN-Q801
AC outlet
• Place the Monitor close to the AC outlet, and keep the power
plug within reach.
■ PN-Q701/PN-Q601
AC outlet
or
2
1 1
• Place the Monitor close to the AC outlet, and keep the power
plug within reach.
AC connection
1
Connect the AC plug for the Monitor
into the AC outlet.
• Place the Monitor close to the AC
outlet, and keep the power plug within
reach.
NOTE
• TO PREVENT RISK OF ELECTRIC
SHOCK, DO NOT TOUCH UN-
INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
2
When turning on the Monitor for
the first time, press POWER on the
Monitor.
3
Insert the batteries into the remote
control unit. (See page EN 6.)
NOTE
• Speakers cannot be detached from the
Monitor.
• The Monitor angle cannot be adjusted.
2
1
POWER (On/Standby)
EN 5

Turning On/Off the Power

PN-Q801/PN-Q701/
H
Press POWER on the Monitor or on the
PN-Q601
remote control unit to turn the power on.
POWER
NOTE
• The Initial Installation starts when the
Monitor powers on for the first time. If
the Monitor has been turned on before,
the Initial Installation will not be invoked.
For changing the settings of the Initial
Installation, please select "Easy Setup" on
the Initial Setup menu.
PN-Q901
H
Press POWER on the Monitor or on
the remote control unit again to turn the
POWER
power off.
• The Monitor enters standby and the
image on the screen disappears.
NOTE
• If you are not going to use this Monitor for a
long period of time, be sure to remove the
AC cord from the AC outlet.
• Weak electric power is still consumed even
when the Monitor is turned off.