Redial Function; Pause Function - Daewoo International DTC-700 Manual De Instrucciones

ENG

REDIAL FUNCTION

Pick up the handset or press key, then press RD key. Only the fi rst 32 digits of last
dialled number will be dialled out.

PAUSE FUNCTION

When dialling, press RD key to insert a 3.6s pause time between the dialled digits.
FLASH FUNCTION
The fl ash time is 100ms, it can support some special network service, such as
answering waiting call, transferring incoming call, etc. These services require a
subscription, the detailed operations depend on the diff erent exchanger.
R CALL TRANSFER FUNCTION
To transfer a call during a conversation to another phone number, press R key and
dial the desired destination number. When you here tone signal return the handset
to the base to fi nish the call transfer.
DIRECT CALL FUNCTION

Emergency Service 112
1. At on-hook or off -hook state, press 112 key.
2. The emergency call number 112 is dialled out.
Note: The emergency call number 112 is pre-stored in CPU and can't be changed.

Network Information Service 11822
a. Record the information number
Note: a) Only 11822, 11825 or 11818 can be recorded to the Info key, any other
number will be regarded as a wrong number.
b) Default recording number is 11822, if you need to change the recorded number
what you recorded before, you should enter into 11822 fi rst correctly.
1. At on-hook state, press Set key and Info key, LCD displays "C_".
2. Enter into the right number, you may meet two situations:
2.1) If you entered the wrong number and press Info key, LCD displays "C_" again to
ask for the right number. If there are 3 fails consecutively, the phone will return back
to on-hook state.
2.2) If you entered into the right number of *11822#, LCD displays "C*11822#_". Press
Info key, LCD displays "_", that means you can record the new number, you may also
meet two situations:
13