Preparing rice that has not been pretreated
NOTE
►
1) Open the lid by pressing the release
2) Remove the cooking bowl
NOTE
►
3) Measure the desired quantity of rice with the help of the supplied measuring
4) Thoroughly wash and drain the rice. This may remove some of the nutrition,
5) After washing the rice, pour it rice into the cooking bowl
6) Then add water up to the relevant CUP markings in the cooking bowl
Subject to taste preferences, salt can also be added to the rice.
SRK 400 A2
Coat the inside of the cooking bowl
oil to achieve a better cooking result.
If the cooking bowl
may have caused the safety shut-off of the appliance to activate, and the
appliance will not allow itself to be switched on.
cup
.
As a general rule: A level measuring cup
for one person. Determine the right quantity of rice / water for yourself by
making a few cooking attempts.
but not washing the rice could lead to poor cooking results and increased
foam and steam formation in the cooking bowl
the rice manufacturer's preparation instructions
–
2 Measuring cups of rice = Water up to CUP marking "2"
–
3 Measuring cups of rice = Water up to CUP marking "3"
–
4 Measuring cups of rice = Water up to CUP marking "4"
–
5 Measuring cups of rice = Water up to CUP marking "5"
evenly with a little fat or vegetable
and lifting the lid simultaneously.
.
is damaged, do not continue to use it! The damage
– filled with rice – is a portion
. Always pay attention to
and smooth it out.
GB │ IE
.
│
27
■