Safety instructions of travel charger
Please read the following information carefully.
1.
The maximum ambient temperature of the travel charger shall not exceed
40°C (104 degrees F).
2.
The Travel Charger shall be installed according to specification. The
current of load and output power shall not exceed the following value:
Input: AC100-240V~ 50/60Hz 0.15A
Output: DC5V
3.
The Travel Charger shall be used for I.T. equipment only.
4.
For indoor use only.
5.
Cleaning – Unplug this from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners to clean; use only a dry cloth.
6.
Water and moisture – Do not use this product under moist environment.
7.
Self-servicing – Attempting to service this product on your own, or
opening or removing device covers may result in exposure to dangerous
voltage or other hazards.
8.
Unplug this apparatus during lighting storms or when unused for lengthy
durations.
9.
This Travel Charger is not intended to be repaired by service personnel in
case of failure or component defect.
FCC notice and cautions
This device and its accessories comply with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device and its accessories may not cause harmful interference.
(2) This device and its accessories must accept any interference received,
including interference that may cause undesired operation.
Part 15.21 Statement:
1A
69