Unpack The Machine; Install The Lower Handle; Install The Upper Handle; Install The Battery Pack - GreenWorks DT40L00 Manual Del Operador

8.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
8.2

INSTALL THE LOWER HANDLE

1. Insert the lower handle (4) into the housing holes.
2. Put screws (8) through the handle holes (7) to fix the
lower handle in position.
English
8.3

INSTALL THE UPPER HANDLE

1. Align the mounting holes in the upper handle (3) and the
lower handle (4).
2. Insert the bolts (10) and secure using the handle knobs
(9).
3. Repeat the same operation on the other side.
8.4

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Open the battery door (5).
2. Push the battery pack (11) into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
7
WARNING
EN