Remove The Battery Pack; Operation; Start The Machine; Stop The Machine - GreenWorks DT40L00 Manual Del Operador

Ocultar thumbs Ver también para DT40L00:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
4. Close the battery door.
8.5

REMOVE THE BATTERY PACK

1. Open the battery door (5).
2. Push and hold the battery release button (13).
3. Remove the battery pack (11) from the compartment.
9

OPERATION

To avoid serious personal injury, wear googles or safety
glasses at all times when operating the dethatcher. Wear a
face mask or dust cover at dusty locations.
9.1

START THE MACHINE

1. Push and hold the start button (1).
2. While you hold the start button (1), pull the bail switch
(2) in the direction of the handle bar.
WARNING
English
3. Once the machine has started you can release the start
button (1).
9.2

STOP THE MACHINE

1. Release the bail switch to stop the machine.
Wait until the tine cylinder fully stops before you start the
machine again. Do not quickly turn the machine off and on.
Always remove the battery pack after you complete the
work.
10

MAINTENANCE

Before maintenance, make sure that you
stop the machine.
wait until all the moving parts stop.
remove the battery pack from the machine.
Do not use strong solvents or detergents on the plastic
housing or components.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
10.1

GENERAL MAINTENANCE

Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
tines.
Tighten correctly all the fasteners and knobs.
10.2

REPLACE THE TINE

8
WARNING
WARNING
WARNING
WARNING
WARNING

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dhf301

Tabla de contenido