Klarfit 10033043 Manual Del Usuario página 26

EN
26
How to connect your remote
1. Connect the vibration and turn it on . The power light will brighten with
red color after a long "Ring".
2. Press the remote control button [+] and [-] simultaneously, release the
buttons until hear two sounds from Vibration. The remote control and
Vibration plate are connected.
Button Functions
[+] Accelerate the Frequency of Vibration, Level 1-99
[-] Decelerate the Frequency of Vibration, Level 1-99
START / STOP
• In standby mode, press the STAR/STOP button to start the Vibration.
• Press the STAR/STOP button to stop Vibration directly.
Troubleshooting
• To test if the remote is connected to the vibration, press the [+] or [-]
Button once a sound will be played now. If only one sound is heard, there
is a stable connection. If a sound is played twice, the connection is faulty. If
no sound is heard at all, reconnect the remote to the device as described
above.
• If the remote control is successfully connected but not working,
disconnect the vibration plate from the power supply. Then repeat the
connection process.
• If you press a button on the remote control and the vibration plate does
not work despite the LED flashing , change the batteries in the remote
control.