Italkero Falo' EVO Instruciones De Montaje Y Uso página 31

troUBleShootinG: manual controls.
FAULT
No flame
Blackening of glass pipe
Glass pipe breakage
LED lights do not light up
* Glass pipe breakage
The technical features of the glass pipe are particular and such as to permit resistance to thermal shocks caused by normal
temperature fluctuations, rain or damp.
Despite the choice of this material (Borosilicate), sudden pipe breakages can occur as a result of particular weather conditions
and/or excessively concentrated temperature fluctuations.
IMPORTANT! This pipe breakage (crack) does not cause injury to people or damage to things in the immediate vicinity of the
appliance.
IMPORTANT! Any pipe breakage does not, in the short term, prevent the appliance from operating, but being a damaged part, it
must be replaced to ensure correct operation.
CAUSE
1 – non enough gas supply flow:
- bad LPG gasification;
- bad LPG gasification with low temperature.
- pressure regulator wrongly set or faulty.
2 – sudden gust of wind (above 3 m/s).
3 – thermocouple interrupted.
4 – valve magnet faulty.
5 - Dump-switch failure or the floor with
inclination greater than 15ϒ .
6 – dirt in gas circuit.
7 – gas leaks.
8 – battery low.
9 – isolation of electrodes and/or faulty
cables.
1-poor quality gas or gas unsuitable for winter
2-bad draught.
3-mains cylinder (optional) out of
position/deformed.
4-exchanger head dirty/damaged.
5-burner dirty/damaged.
1 - excessive thermal shock due to particular
weather conditions.
2 - cleaning with unsuitable instruments.
3 - accidental fall of appliance.
1 - Switch to OFF
2 - Light kit failure
3 - Light kit is not fitted properly
4 - Just turned on (mod. Seebeck)
5 - Device too hot, 85 ¡ C (mod. Seebeck)
31
REMEDY
1- Check:
- Check and replace empty tank;
- Replace with Propane gas tank.
- Regulate or replace.
2 – keep appliance out of wind.
3 - Replace.
4 - Replace.
5 - Replace, change position (floor with
inclination less than 15ϒ ).
6 - Check and clean carefully.
7 - Check and eliminate leak.
8 - Replace.
9 - Replace.
1-use quality gas, preferably pure propane.
2-particularly windy or no wind-protection KIT.
3-reposition/replace/eliminate.
4-clean/replace.
5-clean/replace.
1 - Replace.
2 - Replace.
3 - Replace.
1 - Turn ON
2 - replace
3 - Check links
4 - Wait 5 minutes MIN (mod. Seebeck)
5 - Wait for it to cool down (mod. Seebeck)
UK