Sim Directory And Other Sim Services; Manage Contact Groups - Nokia N95 8GB Guia Del Usuario

SIM directory and other SIM
services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
To see the names and numbers stored on the SIM card,
select Options
>
the SIM directory you can add, edit, or copy numbers
to contacts, and you can make calls.
To view the list of fixed dialling numbers, select
Options SIM contacts
>
setting is only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options
You need your PIN2 code to activate and deactivate
fixed dialling or edit your fixed dialling contacts.
Contact your service provider if you do not have the
code. To add new numbers to the fixed dialling list,
select Options
>
code for these functions.
When you use fixed dialling, packet data connections
are not possible, except when sending text messages
over a packet data connection. In this case, the
message centre number and the recipient's phone
number must be included on the fixed dialling list.
124
SIM contacts SIM directory. In
>
Fixed dial contacts. This
>
Activate fixed
>
New SIM contact. You need the PIN2
When fixed dialling is activated, calls may be possible
to the official emergency number programmed into
your device.

Manage contact groups

Create contact groups
1. In Contacts, scroll right to open the groups list.
2. Select Options
3. Write a name for the group or use the default name,
and select OK.
4. Select the group and
5. Scroll to a contact, and press the scroll key to mark
it. To add multiple members at a time, repeat this
action on all the contacts you want to add.
dialing.
6. To add the contacts to the group, select OK.
To rename a group, select
the new name, and select OK.
Remove members from a group
1. In the groups list, select the group you want to
modify.
2. Scroll to the contact, and select
Remove from
3. To remove the contact from the group, select Yes.
New group.
>
Options Add members.
>
Options > Rename, enter
Options
group.
>