Tabla De Contenido; What's In The Box; How To Power The Camera - Reolink RLC-423 Manual De Instrucciones

EN
Contents
What's in the Box
How to Power the Camera
Camera Connection Diagram
Set up the Camera on Reolink App (For Smartphone)
Set up the Camera on Reolink Client (For PC)
How to Adjust the Camera's Direction
Troubleshooting
Specifications
Notification of Compliance

What's in the Box

PoE Camera ×1 Quick Start Guide ×1
Waterproof Lid ×1 Mounting Hole Template ×1
1m Network Cable ×1 Pack of Screws ×1
Surveillance Sign ×1 Power Adapter ×1 (For RLC-423 only）
1 English

How to Power the Camera

• Powered by the Reolink PoE NVR
1
2
Connect your IP camera to the Reolink PoE NVR with a single network cable, and then the PoE
3
camera will get power from the PoE NVR.
4
5
8
• Powered by the Power Adapter
9
9
• For Reolink RLC-423 & RLC-423S, the ratings of the power adapter should be DC 12V 2A.
10
• For other Reolink PoE camera models, the ratings of the power adapter should be DC 12V 2/1A.
• Powered by the PoE Injector/Switch
• For Reolink RLC-423 & RLC-423S, you need to make sure that the PoE injector/switch is 802.3at
compliant (48V) and supports the active mode.
• For other Reolink PoE camera models, please make sure that the PoE injector/switch is 802.3af
compliant (48V) and supports the active mode.
English 2