Publicidad
Idiomas disponibles
Idiomas disponibles
3. Position three adjustable legs on the projector plate's mounting points, use the necessary washers
and screws to tighten them slightly (do not overtight).
4. Place the projector plate on the adjustable legs recently attached, so that the slots in the plate
match the slots in the adjustable legs, after estimating its position leave the plate aside. Now you
can tighten the legs to the projector plate completely.
Note: The projector plate comes with the corresponding hardware pre-installed.
5. Once the legs are rmly tighten place the projector plate on them again and nalize its adjustment.
Use the corresponding washers and screws to tighten it in place.
M-A/M-B/M-C/M-D
M-E/M-F/M-G/M-H
Publicidad
