Use Of Overhanging Stand (Sz-Stl1/2/X); Sz-Stl1 - Optika Italy SZ Serie Manual De Instrucciones

8.12 Use of overhanging stand (SZ-STL1/2/X)

8.12.1 SZ-STL1

Moving the horizontal arm
1. Unlock the knob on the right side of the horizontal
arm ①. (Fig. 52)
2. The arm can be extended or shortened according
to specific needs. (Fig. 53)
Swivel the head
1. Unlock the fixing knob ① and rotate the head to
the desired swivel angle (left or right), then tighten
the knob again. (Fig. 54)
Rotating the horizontal arm
1. Loosen the horizontal arm fixing knob ② and
rotate the arm, then tighten again the fixing knob.
(Fig. 55)
• NOTE: 180° rotation of the microscope with
respect to the base could cause a rollover of
the entire system.
Page 32
①
F ig. 52 F ig. 52
F ig. 53 F ig. 53
①
F ig. 54 F ig. 54
②
F ig. 55 F ig. 55