Installation - Booster Without Backrest - Harmony DREAMTIME DELUXE Manual De Instrucciones

low down, so that the pelvis is firmly engaged,
just touching their thighs and is NOT across their
stomach.
6. Buckle the vehicle seat belt into place and ensure it is
secure by gently pulling on it.
! BOTH SIDES OF THE LAP BELT MUST PASS UNDER
BOTH ARMRESTS, AND THE LOWER END OF THE
SHOULDER BELT MUST PASS UNDER THE ARMREST
ON THE BUCKLE SIDE.
! Any straps holding the restraint to the vehicle should be
tight, any straps restraining the child should be adjusted
to the child's body, and all straps should not be twisted.
! NEVER USE A VEHICLE LAP-ONLY BELT WHEN USING
THIS BOOSTER SEAT.
! WARNING: To avoid possible entanglement hazard,
see "Entanglement with vehicle seat belt".

INSTALLATION - BOOSTER WITHOUT BACKREST

See "Assembling/disassembling
instructions for removing the backrest.
1. Place the booster seat flush against a forward-facing
vehicle seat. The vehicle seat MUST be equipped with
a 3-point lap-and-shoulder belt. Booster must be
level, stable and not rock side-to-side (see "Vehicle
seating positions").
2. Place child on the booster seat with child's back flat
against the vehicle seat.
3. Thread both sides of the lap belt
under BOTH armrests. Thread the
lower end of the
shoulder belt under
the armrest on the
buckle
ENSURE
belt is snug across
the child's hips. It is important
side
❶.
that the
backrest" for
❶
22