USING CUP HOLDER (WHEN APPLICABLE)
The cup holder is stored in the base of
the booster seat.
• To remove from storage, pull the cup
holder.
TO INSTALL:
Slide cup holder into place over cup
holder clip ❶❷ until locked in place.
TO REMOVE:
Lift release tab on cup holder and pull
cup holder off cup holder clip..
This booster seat is NOT CERTIFIED for aircraft use. Aircraft
seats are not equipped with 3-point lap-and-shoulder
belts which are required for use with this booster seat.
INSTRUCTION MANUAL STORAGE
We recommend that you store your
instruction manual in the pocket provided
on the side of the booster seat.
25
AIRCRAFT INSTALLATION
❶
❷