Getting Started; Led Indication - Cellularline GPS SAFE Manual De Instrucciones

S A F E G P S t r A c k E r

2. GETTING STARTED

To get started with your GPS SAFE, please follow the
steps described below:
1. Open the battery cover; insert the SIM card and bat-
tery .
To insert the SIM card, please:
Open the back cover by unscrewing it as illustrated on
the cover .
Insert your SIM card as shown in the following steps:
first push it down in the slot (step 1), and then slide it
leftwards (step 2).
2. Install Track Manager Software and device driver on
PC. (Software CD)
22
3. On Track Manager, click "Manual" for a detailed on-line
help .
4. Launch Track Manager to complete hardware settings
by setting up a tracking profile and SOS numbers for
the GPS SAFE .
Make sure the PIN Code of the SIM card is entered
when required.
(See more information about hardware settings in
Device Configuration .
5 . Charge the GPS SAFE via USB for at least 4 hours prior
to first use.
6. Once the GPS SAFE is fully charged, have it unplugged
from PC, and it will power on automatically with a
Green LED flashing once every 5 seconds.
7. The device is now ready to use. Please send a "Posi-
tion" message to the GPS SAFE via admin's phone as
instructed in the online help to see how it works.
Once you're ready to track, send a test message to the
tracker to get started:
• Send a text message including "Position" as the mes-
sage content to the tracker from the Admin phone .
• You should then receive a reply message including an
URL to the map where you're currently located.
Click on the URL, and you'll see a map indicating your
current position .
Note:
1. Do not plug in the USB cable to PC before you install the
software.
2. A service charge may be incurred by clicking on the
URL in the SMS message depending on your data plan
subscribed. Contact your mobile service provider for more
details.
S A F E G P S t r A c k E r

3. LED INDICATION

LED Indicator Indication Description
The Power LED flashes Green
Power ON
once every 5 seconds .
The Power LED stays ON Red
when device is being
Charging
charged, and turns off after it
is fully charged .
The Power LED flashes Red
Battery Low
once every 5 seconds .
The GSM LED flashes Orange
GSM ON indicating GSM
communication is activated .
The GPS LED flashes Blue
once every 5 seconds
GPS ON, no
indicating that
fix yet
GPS is ON, but not yet a fix
has been determined .
The GPS LED flashes Blue
twice at a time indicating a
GPS fixed
fix has been determined.
The Red & Green Power LEDs
and Blue GPS LED stay ON in
case of SOS or during a call.
SOS or Call
SOS: causes alerting sound .
Call: causes a dial tone .
The Error LED stays ON Red
indicating the occurrence
of a device
error or hardware
Device Error / malfunction .
Hardware
Malfunction Note: To acquire detailed
information about the error
thatoccurs, please connect
your GPS Safe to Track
Manager software.
IT
EN
FR
ES
DE