Height Adjustment - LG LSC 24971ST El Manual Del Propietario

Installation
When the floor is
not leveled
When the
refrigerator door
is lower than the
freezer door
CAUTION
After leveling the
door height
Next
17

Height adjustment

- To level the door when the floor not level.
When the freezer door is lower –
Use the (-) driver or spanner to turn the
groove or nut of the height adjustment screw
on the left to the clockwise direction to level
the door.
When the refrigerator door is lower –
Use the (-) driver or spanner to turn the
groove or nut of the height adjustment
screw on the right to the clockwise
direction to level the door.
When the refrigerator door is lower than the freezer door while using the
refrigerator, level the doors.
1. Use the tool for adjustment on
the wide side to turn nut
in the clockwise direction to loosen
the keeper nut.
2. Use the tool for adjustment on
the narrow side to turn the
adjustment hinge pin
( )clockwise direction or
( ) counterclockwise
direction to adjust the height of
the refrigerator and freezer doors.
3. After aligning the height of the door, turn the
keeper nut in counterclockwise direction tightly.
Do not force too hard to level the height. The hinge pin can be pulled out.
(Adjustable range of height is a maximum of 2" (5 cm))
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
( )
in
Wrench Size
Adjust Hinge Pin: 11/32"(8mm)
Keeper Nut: 3/4" (18mm)