Ordering Information - Pima CLM412 Instrucciones De Instalación

o Antennas
 Enhanced Features
o DFOTA: Delta Firmware Over the
Air
 Electrical Characteristics
o Output Power:
 Class 3 (23dBm±2dB) for LTE
FDD
 Class 3 (23dBm±2dB) for LTE
TDD
 Class 3 (24dBm+1/-3dB) for
WCDMA
 Class E2 (27dBm±3dB) for EDGE
850/900MHz
 Class E2 (26dBm+3/-4dB) for
EDGE
 1800/1900MHz
Content of the product package
 CLM412 Add-on
Antenna placement guidelines
 Have a clear line of sight to the sky (where possible)
 Be clear and free of obstacles
 Be clear of metal objects
 Be located away from other transmitting devices
 Be securely affixed in location
 Use the supplied cable
How to install the CLM412
Disconnect the control panel from AC and battery power before installing the CLM412.
Follow the next steps to install the add-on.
1. Carefully pull out the SIM card tray (no. 4+5 in the above figure) from the socket, by gently pressing the eject bar (no. 8 in the
above figure).
2. (U)SIM 1 (main) card into slot 4, and (U)SIM 2 (backup, if in use) card into slot 5, with the metal contacts facing downwards
Align
and the angled corner of the card positioned correctly, and carefully insert the tray into place.
3. Connect the antenna to the antenna connector (no. 6 in the above figure), by rotating the SMA connector clockwise.
4. Connect the add-on's circuit board connector (no. 11 in the above figure) to its socket on the control panel's circuit board.
5. Connect the control panel to power.
6. Locate the antenna where the cellular signal is strong; see the Installation guide on how to check the reception level.
7. Set the add-on in the control panel; see how in the Installation guide.
8. Test the add-on using the
The LEDs
The CLM412 LEDs are described in the table below.
Label Color and state
Yellow blinks (200ms on/1800ms off)
Yellow blinks (1800ms on /200ms off)
LD1
Yellow blinks (125ms on /125ms off)
Yellow solid
Red solid
LD2
Red off
LD3 Green solid
Blue
LD4

Ordering information

 CLM412 Kit: P/N 8300049
 Class 4 (33dBm±2dB) for GSM
850/900MHz
 Class 1 (30dBm±2dB) for GSM
1800/1900MHz
o Consumption:
 20uA @Power off
 3mA @Sleep, Typ.
 22mA @Idle
o Sensitivity:
 LTE B1: -101.5dBm (10M)
 LTE B2: -101dBm (10M)
 LTE B3: -101.5dBm (10M)
 LTE B4: -101dBm (10M)
 LTE B5: -101dBm (10M)
 LTE B7: -99.5dBm (10M)
 LTE B8: -101dBm (10M)
 LTE B12: -101dBm (10M)
 Antenna + Cable
Test and Diagnostics
menu.
Description
Network search
Idle
Data transfer
Voice call
Modem is registered on LTE network
Modem is registered on other network
Power on
Used by the manufacturer
 This guide
-2-
 LTE B13: -100dBm (10M)
 LTE B20: -102.5dBm (10M)
 LTE B28: -102dBm (10M)
 WCDMA B1: -110dBm
 WCDMA B2: -110dBm
 WCDMA B4: -110dBm
 WCDMA B5: -110.5dBm
 WCDMA B8: -110.5dBm
 GSM: -109dBm
 DCS: -109dBm
 Approvals
o RoHS Compliant
o CE/GCF/Vodafone (Europe)
o Anatel (Brazil)