Troubleshooting; Specifications - RS HSH-1300 Manual De Instrucciones

TROUBLESHOOTING

Problem
Motor doesn't work
Pouches are not laminating
correctly

SPECIFICATIONS

Model
Dimensions
Maximum Laminating Width
Maximum Laminating Thickness
Film Thickness
Heat method
Warm up time
Cooling system
Motor Type
Maximum Laminating Speed
Number of rollers
Unit weight
Voltage supply
Power Consumption
Possible Cause
- Power cord may not be plugged in.
- Power switch is off.
- If laminating heat sealed pouches,
the machine may be set in the COLD
mode.
-The temperature may be set too low.
-The speed is set too high.
610×295×150 (mm) / 24.0" ×11.6"×5.9" (in)
100V/120V/220~240V(50~60Hz)
13
Possible Solution
- Check and plug in the power cord.
- Check and turn on the power.
- Make sure the machine is in the HOT
mode.
- Check the temperature is set
according to pouch thickness.
- Adjust to a lower speed.
HSH- 1300
330 (mm) / 13 (in)
1mm / 1/30" (in)
75 ~ 250mic / 3-10 (mil)
Hot Roller
7 min
DC FAN
DC GEARED MOTOR
3000 (mm/min) / 9.84 (ft/min)
6
16.5Kg / 36. 4 (lbs)
1350 W
HSH-1300