Gram K2N Serie Manual De Utilización página 9

Function 1. To reset the weight to zero "0", but the display value has to
be lower than ± 2% of maximum capacity.
Function 2. To move one space to the left or downward in setup mode.
Function 1. To subtract the container´s weight.
Function 2. To move one space to the right or upward in setup mode.
Function 1. To view gross or net weight when the balance is on tare
N/G
status. All other keys will be disabled when gross weight
is activated.
Function 2. To increase values upward in setup mode.
Function 1. Key of confirmation in setup mode.
Function 2. Manually transmitting data through RS232 to computer or
printer.
If you know the weight of the container, press this key and input the
container weight value, then put the goods into the container, the
display will show the net weight only.
To set the value of high limit
To set the value of low limit.
To program check weighing High / Low conditions (remark -)
To accumulate weights, the max of the weight times is 9999
To introduce sample value.
To recall accumulations
9