Product Information; Installation Instructions - hawa Folding Concepta 25 Planificación Y Instrucciones De Montaje

HAWA-Folding Concepta 25

2 Product information

Intended use
Maximum door weight
Door width
Door height
Door thickness
Sets are marked left and right
Use Hawa article number 18705 or commercially available door alignment hardware.
Maximum permissible deflection of the hardware assembly face and door ± 2 mm ( ").
Maximum deflection of the cabinet top 2 mm ( ").
Use a commercially available bow handle.
Intended place of use
This furniture hardware is designed for protected interior rooms. Install and operate in dry rooms only.
Article number
Articles are identified by a 5-digit number.
Personnel qualification
Only authorised persons are permitted to carry out installation work. Authorised persons are those who:
- have construction-related installation training or corresponding experience
- have read and understood the safety notes (22991) enclosed with the set.

Installation instructions

The installer is responsible for fixing the hardware to the appropriate positions such as walls, ceiling, floor, cabinet body, etc. The installer must define the
number, dimensioning and load-bearing capacity of the fixing screws so that the specified load-bearing capacity of the hardware including risk allowance is
reached.
He must also assure that the hardware and the folding/slide-in hardware attached to it do not exceed the maximum load-bearing capacity of the attachment
point.
The cabinet design must prevent from tipping over regardless of the door position.
Climatic environmental conditions must be taken into account to the extent that the fastening screws cannot corrode.
Appropriate means must be used to safeguard the fastening screws against unintentional loosening.
Maintenance and cleaning information
The hardware is maintenance free.
Risk and residual risk hazard
The hardware does not pose any risk or residual risk.
If using HAWA-Folding Concepta 25 to conceal electrical appliances, ensure compliance with the safety notes provided by the appliance manufacturer (heat
accumulation). If necessary, use an automatic shutoff device (e.g. Safety Box, www.halemeier.de).
General notes
The document titled "Safety notes (22991)" is an integral component of these installation instructions.
A function check must be performed when installation is completed.
Hand over the instructions and the "Safety notes" (22991) document to the user after completion of the function check.
Hawa parts: metric dimensions apply – dimensions stated in inches are for information only.
Please retain these instructions; replacements are available at www.hawa.ch.
Unless stated otherwise, all drawings show a left-hand installation.
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
Indicates practical information and tips that enable the optimum use of machines, equipment or devices.
25 kg (55 lbs.) (50 kg [110 lbs.] per pair of doors)
13 9
300–700 mm (11 "–2'3 ")
---- - ---- -
16 16
7 3
1250–2600 mm (4'1 "–8'6 ")
---- - - -
32 8
3 1
19–28 mm ( "–1 ")
- - - -
4 8
3
---- -
32
Tel. +41 44 767 91 91, Fax +41 44 767 91 78, www.hawa.ch
3
---- -
32
9