• P7.
VERTICAL SWING KEY
Activate or turn off wind vertical swing function. (Only available when remote controller is used with cor-
responding unit.)
• P8.
HORIZONTAL SWING KEY
Activate or turn off wind horizontal swingfunction. (Only available when remote controller is used with
corresponding unit.)
• P9.
CLOCK KEY
Display the current time. (12: 00 is displayed when resetting or electrifying for the first time. )
Press CLOCK for 5s, icon indicating hour will flash with 0. 5s.
Press it again, icon indicating minute will flash with 0. 5s.
P3 and P4 are used to adjust the figure.
Setting or modification is effective only by pressing OK button to make confirmation.
• P10. TIMER ON KEY (Switch-on timer)
For time ON setting. Once pressing this button, the time will increase by 0. 5 hour. When the settime exce-
eds 10hours, pressing the button willincreasethetimeby1hour. Adjusting the figure to 0. 00, willcanceltime
ON setting.
• P11. TIMER OFF KEY (Switch-off timer)
For time OFF setting. Once pressing this button, the time will increase by 0. 5 hour. When the set time
exceeds 10hours, pressing the button will increase the timeby1hour. Adjust the figure to 0. 00, willcancel-
time ON setting.
• P12. RESET KEY (Reset - internal key)
Press this button with a needle of 1mm to cancel the current setting and reset remote controller.
• P13. LOCK KEY (Lock- internal key)
Press this button with a needle of 1mm to lock or unlock the current setting.
• P14. OK KEY
(Confirms setting and modification of the time)
Used to confirm the time setting and modification.
• P15. COOL/HEAT KEY
(Cooling/Heating)
(inner located), press this button with a needle of 1mm to shift mode between COOL only and COOL&HEAT.
During setting, back lightwill be lightened. Factory default modeisCOOL&HEAT.
• P16. ECO KEY
Activate or turn off economic operation mode. It is suggested to turn on this function when sleeping. (Only
available when remote controller is used with corresponding unit.)
EN - 14