Sauder 414707 Manual Del Usaurio página 16

12 12
The cut out in the BACK
should sit on the top
surface of the BOTTOM.
NAIL
(32 used in this step)
Carefully turn your unit over onto its front edges. Unfold the BACK (H) and lay it over your unit.
Fasten the BACK (H) to your unit using the NAILS (1N).
NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed.
Fasten the FOOT BASE (24E) to the BRACE (O). Use four SILVER 5/8" FLAT HEAD SCREWS (23S).
Push the FOOT (25E) into the FOOT BASE.
NOTE: Turn the FOOT for adjustment. The FOOT should not extend beyond the wooden FEET (R and S).
Page 16
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
1N
www.sauder.com/services
SILVER 5/8" FLAT HEAD SCREW
H
24E
O
25E
23S
(4 used for the FOOT BASE)
414707