Publicidad
Idiomas disponibles
Idiomas disponibles
13
13
The tabs should insert freely into the slots.
Gently tilt the DRAWER SIDES side to
side until the tabs slip into the slots.
1
D24
M
Groove
Insert the DRAWER SIDES (D24 and D25) at an angle into the slot
at each end of the DRAWER FRONT (M).
3
Fasten the DRAWER BACK (D70) to the DRAWER SIDES (D24 and D25). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D719) inserts into the groove of the DRAWER BACK (D70).
Repeat step 13 for the other drawer.
414707
D25
D70
D24
D719
www.sauder.com/services
VIEW THE T-LOCK BOX VIDEO
2
U N
F I
D719
D24
Be sure the DRAWER
BOTTOM inserts
into the DRAWER
FRONT groove.
Slide the DRAWER BOTTOM (D719) into the grooves in the
DRAWER SIDES (D24 and D25) and DRAWER FRONT (M).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
D25
N I
S H
E D
M
D25
30S
Page 17
Publicidad
