Additional Features - Lennox GCM Serie El Manual Del Propietario

Additional features

Sleep Mode
Press the Sleep Mode Auto button to set the
1
time you want the unit to turn off automatically.
The Timer is programmed in one-hour
2
increments by pressing the Sleep Mode Auto
button 1 to 7 times.
The sleep mode is available for 1 to 7 times. To
alter the time period in steps of 1 hour, press
the Sleep Mode Button while aiming at air
conditioner.
3
Make sure the Sleep Mode Auto LED lights up.
Setting the Time
Time can be set only when you have pressed
1
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed
to reset the time.
Press the Start/Stop button.
Delay Start/Pre-Set Stop
Make sure the time is set correctly on the
1
remote control display.
Press the ON/OFF Timer
2
buttons to turn Timer on or off.
Press the Time Setting
3
buttons until the desired
time is set.
NOTE: Select one of the following four types of operation.
Delay OFF Timer
2
ON OFF
To cancel the setting the timer.
Delay ON Timer Delay OFFand ON Timer
11
To cancel the Sleep Mode, press the sleep
Mode Auto button several times until the star
( ) disappears from the operation display.
Note: The Sleep Mode will be operated at
low fan speed (cooling) or medium fan
speed (heat pump only) for quiet sleeping.
IN COOLING MODE: The temperature will
automatically rise by 1°C over the next 30
minutes and by 2°C in 1 hour for comfortable
sleeping.
Press the Time Setting buttons until the
desired time is set.
Press the Timer SET button.
3
Note: Check the indicator
for A.M. and P.M.
Press the selected on/off setting by
4
pressing the Timer SET button while
aiming the remote control at the signal
receptor.
Press the Timer Cancel button while
CANCEL
aiming remote control at the signal
receptor.
(The timer lamp on the air conditioner and
the display will go out.)
with the unit running
SET
SET
Delay ONand OFF Timer