Removable Multi Opener Lever; Troubleshooting; Security Advices - CASO DESIGN D10 Manual De Instrucciones

16.2.1

Removable multi opener lever

The magnetic lid lever with can opener lever can be
removed from the unit.
1 Magnetic Lid Lifter
9 Drive shaft
Removing the lever
To detach the lever from the unit, bring it carefully into
the 45° position.
Hold the can opener with one hand while gently pulling the can opener lever away from the
front of the unit with the other.
Cleaning of the lever
Clean the lever regularly and thoroughly in warm, soapy water. Rinse and dry thoroughly.
Attaching the lever
To re-attach the can opener lever back on the unit, hold it in the 45° position, insert drive
shaft into the key hole near the drive wheel and push the lever in all the way.
Rotate the can opener lever clockwise until it is horizontal.
► If lever is properly engaged, it cannot be removed in horizontal position.
► Cutting mechanism may collect food or paper from can labels and should be washed
fequently.
► The motor and internal gears of your can opener unit are permanently lubricated at the
factory for lifetime service and require no further attention. The cutting blade is made of
hardened steel and will last for years under normal use. Do not attempt to sharpen.

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Security advices

Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
Caso D10
2 Can Opener Lever
Please note
35