Publicidad
STEP 1A Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall, must not be less than 1/4 in. (6.4 mm)
1.
Make sure that the placement of the wall plate
the hole locations.
2.
Drill pilot holes using a 1/4 in. (6.4 mm) diameter drill bit.
3.
Install 2 anchors
03
into the holes making sure that they are flush with the wallboard.
1
Max. 1/4 in.
UP
01
6
is not on a stud. Position the wall plate
01
2
(6.4 mm)
Wallboard Option
at your desired height and level the wall plate
01
3
and mark
01
03
Publicidad
