Turntable Operation - Crosley T400A Manual De Instrucciones

English

Turntable Operation

Automatic Operation
1. Set the Size Selector to the appropriate record size.
2. Set the Speed Button accordingly.
3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the
turntable is being moved or cleaned.
5. Release the tonearm Hold Down Clip.
Note: when the turntable is not in use, remember to lock back hold down clip.
6. Gently push the START Button. The turntable will start and the tone arm
automatically will move to the record. When the record has finished playing,
the tone arm will automatically return to the tone arm rest and the turntable
will shut off.
7. To stop playing the record before it reaches the end, press the STOP Button.
The tone arm will lift and return to the tone arm rest, and the turntable will
shut off.
8. To pause the record before it has completed playing, press the Tone Arm Lift
Button. Press the Lift button again to continue playing the record.
9. After playing is finished, lock the Hold Down Clip to secure the tonearm.
Manual Operation
1. Set the Size Selector to the appropriate record size.
2. Set the Speed Button accordingly.
3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the
turntable is being moved or cleaned.
5. Release the tonearm Hold Down Clip.
Note: when the turntable is not in use, remember to lock back hold down clip.
6. Press the Lift Button in to raise the tone arm.
7. Gently move the tone arm where play is desired to begin.
8. Press the Lift button again to gently lower the tone arm and play the record.
9. After playing is finished, lock the Hold Down Clip to secure the tonearm.
Caution: When the tone arm reaches the end of the record, it will lift and return to the
tone arm rest automatically. When this happens, do not interfere with the tone arm's
motion, or damage to the mechanism may occur.
6