Features And Controls - Briggs & Stratton PowerBoss PW101 Manual Del Operador

Ocultar thumbs Ver también para PowerBoss PW101:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
,
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.
C - Recoil Starter — Used for starting the engine manually.
D - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
E - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
F - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Water Inlet — Connection for garden hose.
J - Pump — Develops high pressure.
K - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
10
L - Detergent Siphoning Tube/Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
M - Engine Identification — Provides model, type and code
of engine. Please have these readily available if calling
for assistance.
N - Oil Fill/Dipstick — Check, add and drain engine oil here.
P - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
R - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
S - Spray Tips — Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
High Pressure Outlet — Connection for high pressure hose.
www.powerboss-equipment.com
S
R
P
N
M
L

Publicidad

Tabla de contenido
loading

Tabla de contenido