Q-See QCW1000 Guia De Inicio Rapido página 12

INSTALLING
THE CHIME
STEP 1
Remove the battery cover with a small, flat
screwdriver (not included). Insert the screwdriver
in the hole on the bottom of the chime, then gently
push in towards the doorbell and pry up to release
the front cover.
12
STEP 2
Install the four included
batteries into the chime.
STEP 4
Press the Register
button to pair the chime
to the doorbell. You may
hear a beeping sound
from the doorbell again.
STEP 3
Hold the doorbell button
for ~10 seconds until you
hear a beeping sound.
STEP 5
Replace the front cover
of the chime. To hang the
chime, use a nail or small
screw that fits the top
hole on the back of the
chime.