Q-See QCW1000 Guia De Inicio Rapido página 5

STEP 8
Install the included doorbell mounting bracket using
the supplied screws. Mount the bracket with the
screw hole at the bottom and facing away from the
wall. Ensure that the wires are pulled through the
bracket before mounting. Q-See suggests using a
level and marking drill holes with a pencil for this step.
STEP 9
Insert either doorbell wire into either connector
on the doorbell power dongle. Be sure that the
exposed wire is securely inserted. Clamp the lever
closed. Repeat this step for the second wire.
5