Astralpool 35275 Manual De Instalación Y Mantenimiento página 4

For this connection method, cables with appropriate sections should be used according to their length.
6. CONTROL SYSTEMS OF THE LED PROJECTORS:
Installations with MICRO spotlights only, can be controlled from the power supply itself. In installations where there are
also Colorplus spotlights, the power supply can synchronize these spotlights with the MICRO spotlights.
6.1. Control through the power supply
The power supply is provided with a pushbutton, which is the simplest way of controlling the spotlights. Each press
changes the colour or sequence.
The pushbutton is normally closed (NC). It is connected in the terminals indicated "pushbutton input" shown in Figure 1.
With this control system you have 14 function modes: 7 fixed colours and 7 sequences with different colours.
6.1.1. Diagram of the electrical connection
Power supply
projectors
In installations with more than four MICRO spotlights, which must be controlled jointly, a single pushbutton should be
installed connected in parallel to the connection terminals.
Length (m)
0-20
20-30
30-50
Mini LED
Cable section
2.5 mm 2 Cu
2
4 mm Cu
2
6 mm Cu
4