Edit Device - Fagor HAN 8000 Manual De Instrucciones

Add "HD H264 4IN1 Encoder"
Choose device type "HD H264 4in1 Encoder", set device name (you can name as you like),
and set IP address and Port of the device. You can check IP address by clicking down key
on the panel or you can enter into "Network Setting" in the menu to check it. Default IP
address and Port for HD H264 4in1 Encoder are 192.168.000.218 and 2009.

8.4 EDIT DEVICE

Click the device you need to edit and then you can edit any you like. If the device is not
connected, then it shows as below:
Then check by below steps:
1. Check if the connection info is correct:
25