Adc Update Rate; Display Condition At Zero - Gram CK Serie Manual De Utilización

UF-7 ADC Update Rate
SPEEd 0
SPEEd 1
SPEEd 2
Factory speed: SPEEd 0
1. Press the
2. Use 0 ~ 2 keys to enter ADC speed.
3. Press the
4. To exit and return back to weighing mode, press the
UF-8 Display Condition at Zero
ZP 0
Off.
ZP 1 One division not to display at zero.
ZP 2
Two division not to display at zero.
ZP 3 Three division not to display at zero.
ZP 4
Four division not to display at zero.
ZP 5
Five division not to display at zero.
Factory default: ZP 1
1. Press the
2. Use 0 ~ 5 keys to enter condition at zero.
3. Press the
4. To exit and return back to weighing mode, press the
16
Low speed 7.5 hz.
Standard speed 15 hz.
High speed 30 hz.
key to access programming functions.
key to confirm.
key to access programming functions.
key to confirm.
key.
key.