Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Oven Installation
Removing the Oven Door
Three-wire Connection
•
Connect red wire from oven to red wire injunction box.
•
Connect black wire from oven to black wire in junction box.
•
Connect both green ground wire and white wire from oven to white (or gray)
neutral wire in junction box.
The conduit cable, where connected at the oven, swivels. Rotate conduit cable
upward (or downward) and direct through hole prepared in cabinet to attach to J-
Box.
To maintain serviceability, the flex conduit must not be shortened and should be
routed to permit temporary removal of the oven.
Note: Before installing the oven be sure to verify the cabinet dimensions and electrical
connections.
For ease of installation, some oven doors may be removed to reduce the weight of
the oven by 30 lbs (14 kg) per door, before installing into the cabinet. See "To
remove the oven door."
m
CAUTION:
When removing the door:
•
Make sure oven is cool and power to the oven has been turned
off before removing the door. Failure to do so could result in
electrical shock or burns.
•
The oven door is heavy and fragile. Use both hands to remove
the oven door. The door front is glass. Handle carefully to avoid
breaking.
•
Grasp only the sides of the oven door. Do not grasp the handle
as it may swing in your hand and cause damage or injury.
•
Failure to grasp the oven door firmly and properly could result in
personal injury or product damage.
•
To avoid injury from hinge bracket snapping closed, be sure that
both levers are securely in place before removing the door. Also,
do not force door open or closed - the hinge could be damaged
and injury could result.
English 7
Publicidad
Capítulos
Tabla de contenido
