VONROC HT501DC Traducción Del Manual Original página 6

EN
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
ADDITIONAL SAFETY WARNINGS FOR
HEDGE TRIMMER
• Keep the area you are working in clean and tidy.
• Always hold the trimmer properly. When opera-
ting us both hands.
• If you are using a means of support to raise
yourself off the ground, ensure that it is stable
and cannot topple over - do not overreach at
any time.
• Do not use power tools in the rain or wet en-
vironments. Do not use power tools where there
is a risk of fire or explosion - i.e. near flammable
liquids or gases.
• Do not allow children into the area where you
are working.
• Do not let children or other people touch power
tools.
• Do not leave the power tool unattended.
• Store in a dry place well out of reach of children.
• Always use safety glasses and gloves. We also
recommend the use of ear protectors.
• Wear the right clothes - not loose fitting or je-
wellery and ensure garments cannot come into
contact with moving parts.
• If you have long hair, tie it back safely to avoid
tangling it in moving parts.
• Before using any power tool, check first for
damaged parts and if found do not use it before
the part or parts have been replaced with new
ones.
• Do not use power tools when you are tired or
have been drinking alcohol.
• Do not force the appliance - let it work at the
rate for which it was intended.
• Do not overreach while working - you may lose
your balance.
• Never use this appliance without the blade
guard fitted. It must always remain fitted.
• Only use spare parts and attachments supplied
by Vonroc. Use of attachments other than those
supplied or recommended by Vonroc will invali-
date your guarantee and could be dangerous.
6
• Only use this appliance for its intended purpose
trimming hedges and bushes.
Above all be carefull!
Danger!
• Keep all parts of the body away from the cut­
ting blade. Do not remove cut material or hold
material to be cut when blades are moving.
Make sure the switch is off when clearing
jammed material. A moment of inattention
while operating the hedge trimmer may result in
serious personal injury.
• Carry the hedge trimmer by the handle with the
cutting blade stopped. When transporting or
storing the hedge trimmer always fit the trans­
port protection sleeve. Proper handling of the
hedge trimmer will reduce possible injury from
the cutting blades.
• The cutting elements continue to move after the
motor is switch off.
• Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an authorised
repairer.
• Inspect the hedge or bushes for foreign objects
like wire fences
• Keep your hands and feet away from the cutting
area at all times.
• Always hold the trimmer at a safe distance from
the body.
• Always wear protective goggles.
• Always wear gloves.
• Only use the trimmer in daylight.
• Ensure the ventilation openings are clear of
debris at all times.
• Ensure there are no people of animals within 5
metres of your trimming area.
• Remove the plug from the power socket before
attempting any maintenance.
• After use the tool should be stored so that the
blade is not exposed.
• Hold the power tool by insulated gripping surfa-
ces only, because the cutter blade may contact
hidden wiring. Cutter blade contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
WWW.VONROC.COM