Inserting The Extended Sliding Tray And; Attaching The Crank Handle - Ellison SuperStar Excel Manual De Instrucciones

Inserting the Extended Sliding Tray and Sliding Adapter Pad
WARNING
1. Remove SuperStar Excel Machine from the shipping carton and place it on a
clean, flat, sturdy, non-skid surface. Take care when lifting machine out of the
carton, as it weighs approximately 30 lbs (13.6 kg).
2. Remove Extended Sliding Tray from bottom of the carton. Place Extended
Sliding Tray onto Side Rails. For cutting with Bigz dies, place Sliding Adapter
Pad in Extended Sliding Tray.
3. The Extended Sliding Tray can now move back and forth through the
machine.
Molded Handholds

Attaching the Crank Handle

1. Slip the Lock Washer (Item 2) over the Screw (Item 3) and drop them into the
hole in the top of the Crank Handle (Item 1).
2. Push the Crank Handle assembly over the square roller shaft protruding
from the SuperStar Excel Machine. Insert Allen Wrench into Screw (Item 3)
to tighten. Turn clockwise (Figure A). Tighten Screw as far as possible to
ensure maximum pressure.
3. Press the Screw Cap Cover (Item 4) in place.
The SuperStar Excel Machine is very heavy.
Use extreme care and caution when handling.
Seek assistance whenever possible.
Square Roller Shaft
Figure A
5
(1) Crank Handle
(2) Lock Washer
(4) Screw Cap Cover
(3) Screw