Operation; Using The Dryer - LG DLE3400 Serie Manual Del Propietário

OPERATION

WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS
before operating this appliance.

Using the Dryer

1
Clean the Lint Filter
If the lint filter has not already been cleaned, lift out the filter and remove
the lint from the last load. This will help ensure the fastest and most efficient
drying performance. Make sure to reinstall the filter, pressing down until it
clicks firmly into place.
2
Load the Dryer
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
3
Turn on the Dryer
Press the Power button to turn on the dryer. The cycle LEDs will illuminate
and a chime will sound.
4
Select a Cycle
Turn the cycle selector knob in either direction until the LED for the desired
cycle is on. The preset temperature, dry level, and option settings for that
cycle will be shown. Default settings for the selected cycle can now be
changed if desired. Refer to the Cycle Setting and Options page for details.
NOTE
• Not all options or modifiers are available on all cycles. Refer to
the Cycle Guide page for default settings and available options.
A different chime will sound and the LED will not come on if the
selection is not available.
5
Begin Cycle
Press the Start/Pause button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the Start/Pause button.
If the cycle is not restarted within 60 minutes of being paused, the dryer will
shut off and the settings will be lost.
6
End of Cycle
When the cycle is finished, the chime will sound. Immediately remove your
clothing from the dryer to reduce wrinkling. If Wrinkle Care is selected, the
dryer will tumble briefly every few minutes to help prevent wrinkles from
setting in the clothes.
OPERATION 31