Function Switch; Functions; Trouble Running The Train; Cleaning And Maintenance - marklin 29214 Instrucciones

7.1 Controlling the Locomotive
The control knob for operating locomotives
always controls only the locomotive that has just
been selected with the address selector switch.
All other locomotives or powered rail cars con-
tinue to run at the speed last set for them.
Important: When a new address is selected and
the control knob is already set at a speed position
(any speed position), the locomotive just selected
will immediately run at this speed. You must select
this locomotive address a second time, before you
can control the locomotive.
After you switch to a new address, it takes a mo-
ment before the newly selected locomotive can
actually be controlled. This feature makes it pos-
sible for you to skip over other addresses when
switching to a new address, without the locomo-
tives assigned to these addresses being affected
by the current setting for the control knob. You
can use this short period of time to set the control
knob in such a way after selecting the address
that it is at approximately the same speed as the
newly selected locomotive or is at the desired
speed of the locomotive.

7.2 Function switch

The controller can activate one function on digital
locomotives.
8. Locomotive Functions
• Recognition of the mode of operation: automatic.
• Addresses that can be set: 1 - 255
• Address set at the factory: 78 ^
• ABV — Adjustable acceleration/braking delay.
• Adjustable maximum speed.
• Setting the locomotive parameters (address,
acceleration/braking delay, maximum speed):
with the Control Unit, Mobile Station or
Central Station.

9. Trouble Running the Train

• If the train does not run, check to make sure
that the connections have been done as shown
in Part 6.
• Check to see if there a short circuit or an
overload on the layout or if a locomotive or
car is derailed. Correct the short circuit or the
overload by reducing the number of power
consumers (locomotives, lighted cars, etc.), and
set the derailed locomotive or car back on the
rails.
• If the locomotive is damaged, do not use it any
more. If car becomes damaged, remove this car
from the train and do not use it anymore.

10. Cleaning and Maintenance

• Check to see if hair or dirt gets on the axles on
the train and remove this hair or dirt from the
axles with the help of a pair or tweezers so that
the train runs correctly.
• The train can be wiped with a dry, lint-free cloth.
• More maintenance instructions see point 13.

11. Disposing

Products marked with a trash container
with a line through it may not be
disposed of at the end of their useful life
in the normal household trash. They
must be taken to a collection point for
the recycling of electrical and electronic devices.
There is a symbol on the product, the operating
instructions, or the packaging to this effect. The
materials in these items can be used again
according to this marking. By reusing old devices,
materially recycling, or recycling in some other
form of old devices such as these you make an
important contribution to the protection of our
environment. Please ask your city, town,
community, or county authorities for the location
of the appropriate disposal site.
www.maerklin.com/en/imprint.html

12. Warranty

The warranty card included with this product
specifies the warranty conditions.
• Please contact your authorized Märklin dealer
for repairs or contact:
UK
Gebr. Märklin & Cie. GmbH
Reparaturservice
Stuttgarter Str. 55 - 57
73033 Göppingen
Germany
Tel: +49 7161 608 222
E-Mail: Service@maerklin.de
11