Heating mode
Vireoo is designed to heat two people sitting on each side of the
table. It will take about 1 minute from the time you switch on
the table until you feel the heat. In order to get the most out
of your Vireoo table, you should place a leg on each side of the
table leg. By placing your legs this way, you will get heat on the
inside of both of your legs and your body can utilise the heat
optimally. Press the On/Off switch (1) to turn off the product if
you do not require further heat.
* Vireoo Professional is equipped with sensors which make
the product turn off and on automatically (provided that the
product is turned on). The sensors are timed to three minutes.
This means that if no movement is sensed within three minutes,
the table turns off automatically. Vireoo Professional is also
equipped with series connection circuits making it possible to
connect up to five tables to the same power outlet. The series
UK_
connection circuits are located on the bottom of the table and
can be attached and removed. If power or series connection
circuits are not installed, the protective caps should be placed
on the connectors to prevent water or dirt from entering the
circuits.
Power plugs, series connection circuits and protective caps
should be installed as shown.
* Applies only to Vireoo - Professional/Light