MENSA HEATING Vireoo Manual Del Usuario página 54

Install the tabletop with four screws. Turn then
Vireoo-table correctly and reconnect power.
You are now ready to enjoy your new Mensa
Heating product.
* Applies only to Vireoo - Professional/Light
** Applies only to Vireoo - Private/Professional Light
2
** Place the table leg standing on the top
bracket, so that the top bracket is facing the
ground/floor. Remove the transport protection
by loosening the the two screws. Route the
cord through the leg and pull it up so that it fits
the table leg. Make sure the cord is positioned
correctly, so that it is located directly next to
the hole in the foot. Fasten the foot with the
two screws.
3
UK